Changes for page KerberosAndLDAP

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -2,76 +2,83 @@
2	2
3	3	The guide I followed was [[https:~~/~~/wiki.debian.org/LDAP/OpenLDAPSetup#Kerberos>>https://wiki.debian.org/LDAP/OpenLDAPSetup#Kerberos]] which while it worked required some minor tweaks. I obtained edit privileges for the Debian Wiki and updated the guide with the fixes that I found. I however have a Synology NAS and that can run an LDAP Server. So this guide differs a little from the upstream Debian Guide.
4	4
	5	+
5	5	First, install the packages containing the LDAP-enabled Kerberos servers ([[krb5-kdc-ldap>>url:https://packages.debian.org/krb5-kdc-ldap]] and [[krb5-admin-server>>url:https://packages.debian.org/krb5-admin-server]]) and the [[schema2ldif>>url:https://packages.debian.org/schema2ldif]] tool:
6	6
7		-##{{{ $ sudo apt install krb5-kdc-ldap krb5-admin-server schema2ldif }}}##
	8	+##{{{$ sudo apt install krb5-kdc-ldap krb5-admin-server schema2ldif}}}##
8	8
	10	+
9	9	Then load the ##kerberos## schema:
10	10
11		-##{{{
12		-$ zcat /usr/share/doc/krb5-kdc-ldap/kerberos.openldap.ldif.gz | ldapadd -H ldap:~/~/nas.fqdn/ -D uid=root,cn=users,dc=example,dc=com
13		-Password:
	13	+##{{{$ zcat /usr/share/doc/krb5-kdc-ldap/kerberos.openldap.ldif.gz | ldapadd -H ldap://nas.fqdn/ -D uid=root,cn=users,dc=example,dc=com -W}}}##
	14	+##{{{Enter LDAP Password:}}}##
	15	+##{{{adding new entry "cn=kerberos,cn=schema,cn=config"}}}##
	16	+##{{{$}}}##
14	14
15		-adding new entry "cn=kerberos,cn=schema,cn=config"
16		-$
17		-}}}##
18	18
	19	+Having an index on the ##krbPrincipalName## improves performance and also suppresses some log messages if ##slapd## is configured to log more than default for the database(s) where you intend to store Kerberos data. As this is OpenLDAP on the Synology, it does not use ##mdb## format, it uses ##bdb##:
19	19
	21	+##{{{$ ldapmodify -H ldap://nas.fqhn/ -D uid=root,cn=users,dc=example,dc=com -W <<EOF}}}##
	22	+##{{{dn: olcDatabase={1}bdb,cn=config}}}##
	23	+##{{{add: olcDbIndex}}}##
	24	+##{{{olcDbIndex: krbPrincipalName eq,pres,sub}}}##
	25	+##{{{EOF}}}##
	26	+##{{{Enter LDAP Password:}}}##
	27	+##{{{modifying entry "olcDatabase={1}bdb,cn=config"}}}##
	28	+##{{{$}}}##
20	20
21		-And add an index on the ##krbPrincipalName## (improves performance and also suppresses some log messages if ##slapd## is configured to log more than default) for the database(s) where you intend to store Kerberos data:
22	22
23		-{{{# ldapmodify -H ldap:~/~/nas.fqhn <<EOF
	31	+Next, you need to create and configure two entries which will be used by the Kerberos servers to connect to OpenLDAP. As you will not run the Kerberos KDC and Admin Server on the same host as OpenLDAP, these steps are required. In order to keep things nicely separated, everything will be created under a separate ##organizationalUnit##.
24	24
25		-dn: olcDatabase={1}bdb,cn=config
	33	+##{{{$ ldapadd -H ldap://nas.fqhn/ -D uid=root,cn=users,dc=example,dc=com -W <<EOF}}}##
	34	+##{{{dn: ou=Services,dc=example,dc=com}}}##
	35	+##{{{objectClass: organizationalUnit}}}##
	36	+##{{{objectClass: top}}}##
	37	+##{{{ou: Services}}}##
	38	+## ##
	39	+##{{{dn: ou=kerberos,ou=Services,dc=example,dc=com}}}##
	40	+##{{{objectClass: organizationalUnit}}}##
	41	+##{{{objectClass: top}}}##
	42	+##{{{ou: kerberos}}}##
	43	+## ##
	44	+##{{{dn: uid=kdc,ou=kerberos,ou=Services,dc=example,dc=com}}}##
	45	+##{{{uid: kdc}}}##
	46	+##{{{objectClass: account}}}##
	47	+##{{{objectClass: simpleSecurityObject}}}##
	48	+##{{{userPassword: {CRYPT}x}}}##
	49	+##{{{description: Kerberos KDC Account}}}##
	50	+## ##
	51	+##{{{dn: uid=kadmin,ou=kerberos,ou=Services,dc=example,dc=com}}}##
	52	+##{{{uid: kadmin}}}##
	53	+##{{{objectClass: account}}}##
	54	+##{{{objectClass: simpleSecurityObject}}}##
	55	+##{{{userPassword: {CRYPT}x}}}##
	56	+##{{{description: Kerberos Admin Server Account}}}##
	57	+##{{{EOF}}}##
	58	+##{{{Enter LDAP Password:}}}##
	59	+## ##
	60	+##{{{adding new entry "ou=Services,dc=example,dc=com"}}}##
	61	+## ##
	62	+##{{{adding new entry "ou=kerberos,ou=Services,dc=example,dc=com"}}}##
	63	+## ##
	64	+##{{{adding new entry "uid=kdc,ou=kerberos,ou=Services,dc=example,dc=com"}}}##
	65	+## ##
	66	+##{{{adding new entry "uid=kadmin,ou=kerberos,ou=Services,dc=example,dc=com"}}}##
26	26
27		-add: olcDbIndex
28	28
29		-olcDbIndex: krbPrincipalName eq,pres,sub
	69	+Now, it was at this point that I had a problem, because the LDAP server on the Synology did not like adding users with placeholder passwords. I ended up working around it using a different construct:
30	30
31		-EOF
	71	+##{{{dn: cn=kadmin,ou=kerberos,ou=Services,dc=example,dc=com}}}##
	72	+##{{{sn: kadmin}}}##
	73	+##{{{cn: kadmin}}}##
	74	+##{{{objectClass: person}}}##
	75	+##{{{objectClass: pwdPolicy}}}##
	76	+##{{{pwdAttribute: userPassword}}}##
	77	+##{{{pwdMinLength: 8}}}##
	78	+##{{{pwdCheckQuality: 2}}}##
	79	+##{{{pwdPolicySubentry: cn=kadmin,ou=kerberos,ou=Services,dc=example,dc=com}}}##
	80	+##{{{userPassword: {SSHA}<hashed password>}}}##
	81	+##{{{description: Kerberos Admin Server Account}}}##
32	32
33		-modifying entry "olcDatabase={1}bdb,cn=config"
34		-
35		-}}}
36		-
37		-
38		-Next, you need to create and configure two entries which will be used by the Kerberos servers to connect to OpenLDAP. If you are running Kerberos and OpenLDAP on the same system, these steps are optional, but recommended. In order to keep things nicely separated, everything will be created under a separate ##organizationalUnit##. Note that a simple bind (##-x -D##) is used instead of an ##EXTERNAL## bind since write access to the dc=example,dc=com DIT is necessary:
39		-
40		-
41		-{{{# ldapadd -x -D cn=admin,dc=example,dc=com -W <<EOF
42		-dn: ou=Services,dc=example,dc=com
43		-objectClass: organizationalUnit
44		-objectClass: top
45		-ou: Services
46		-
47		-dn: ou=kerberos,ou=Services,dc=example,dc=com
48		-objectClass: organizationalUnit
49		-objectClass: top
50		-ou: kerberos
51		-
52		-dn: uid=kdc,ou=kerberos,ou=Services,dc=example,dc=com
53		-uid: kdc
54		-objectClass: account
55		-objectClass: simpleSecurityObject
56		-userPassword: {CRYPT}x
57		-description: Kerberos KDC Account
58		-
59		-dn: uid=kadmin,ou=kerberos,ou=Services,dc=example,dc=com
60		-uid: kadmin
61		-objectClass: account
62		-objectClass: simpleSecurityObject
63		-userPassword: {CRYPT}x
64		-description: Kerberos Admin Server Account
65		-EOF
66		-Enter LDAP Password: SECRET
67		-
68		-adding new entry "ou=Services,dc=example,dc=com"
69		-
70		-adding new entry "ou=kerberos,ou=Services,dc=example,dc=com"
71		-
72		-adding new entry "uid=kdc,ou=kerberos,ou=Services,dc=example,dc=com"
73		-
74		-adding new entry "uid=kadmin,ou=kerberos,ou=Services,dc=example,dc=com"}}}
75		-
76		-
	83	+and that seems to have worked out fine as my KDC is fully functioning. It required modifying the rest of the guide with the fact that it no longer was ##uid=kadmin## and ##uid=kdc##, but rather ##cn=kadmin## and ##cn=kdc##. The most important thing is that it works.
77	77